<code id="obzzi"><ol id="obzzi"></ol></code>
      <meter id="obzzi"></meter>
    1. <meter id="obzzi"><u id="obzzi"></u></meter>
    2. LPC1113

      芯片信息

      型號 封裝 在線定購
      LPC1113FBD48/301(查看) LQFP48
      LPC1113FBD48/302(查看) LQFP48

      引腳布局

      (點擊圖片看大圖)
      技術資料—— LPC1113 PDF技術資料
      LPC1113 參數
      LPC1113 存儲器
      Flash (KB) 24
      RAM (kB) 8
      LPC1113 其他參數
      fmax (MHz) 50
      I/Opins 42
      UART 1
      I2C 1
      I2S -
      SPI 2
      SSP 2
      ADC 8
      DAC -
      定時器 5
      PWM 11
      I/O 電壓 (V) 3.3
      CPU 電壓 (V) 3.3
      LPC1113 封裝與引腳
      LQFP48

      LPC1113 概述

      The LPC1113 devices are a ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures.

      The LPC1113 devices operate at CPU frequencies of up to 50 MHz.

      LPC1113 特性

      • System
        • ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
        • ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
        • Serial Wire Debug.
        • System tick timer.
      • Memory
        • 24 kB on-chip flash programming memory.
        • 8 kB SRAM.
        • In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
      • Digital peripherals
        • Up to 42 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors.
        • GPIO pins can be used as edge and level sensitive interrupt sources.
        • High-current output driver (20 mA) on one pin.
        • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
        • Four general purpose counter/timers with a total of four capture inputs and 13 match outputs.
        • Programmable WatchDog Timer (WDT)
      • Analog peripherals
        • 10-bit ADC with input multiplexing among 8 pins.



      久久爱免费视频在线观