<code id="obzzi"><ol id="obzzi"></ol></code>
      <meter id="obzzi"></meter>
    1. <meter id="obzzi"><u id="obzzi"></u></meter>
    2. LPC1343

      芯片信息

      型號 封裝 在線定購
      LPC1343FBD48(查看) LQFP48
      LPC1343FHN33(查看) HVQFN33

      引腳布局

      (點擊圖片看大圖)
      技術資料—— LPC1343 PDF技術資料
      LPC1343 參數
      LPC1343 存儲器
      Flash (KB) 32
      RAM (kB) 8
      LPC1343 其他參數
      fmax (MHz) 72
      I/Opins 28-42
      UART 1
      I2C 1
      I2S -
      SPI 1
      SSP 1
      ADC 8
      DAC -
      定時器 5
      PWM 11
      I/O 電壓 (V) 3.3
      CPU 電壓 (V) 3.3
      LPC1343 封裝與引腳
      LQFP48,HVQFN33

      LPC1343 概述

      The LPC1343 are ARM Cortex-M3 based microcontrollers for embedded applications featuring a high level of integration and low power consumption. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration.

      The LPC1343 operate at CPU frequencies of up to 72 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.

      LPC1343 特性

      • 10-bit ADC with input multiplexing among 8 pins
      • ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
      • ARM Cortex-M3 processor, running at frequencies of up to 72 MHz
      • 32 kB on-chip flash programming memory.
      • 8 kB SRAM.
      • Code Read Protection (CRP) with different security levels
      • GPIO pins can be used as edge and level sensitive interrupt sources
      • High-current output driver (20 mA) on one pin
      • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus
      • In-Application Programming (IAP)
      • In-System Programming (ISP)
      • Integrated oscillator with an operating range of 1 MHz to 25 MHz
      • Power-On Reset (POR)
      • Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
      • Serial Wire Debug and Serial Wire Trace port
      • Single power supply (2.0 V to 3.6 V)
      • Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
      • Unique device serial number for identification
      • USB 2.0 full-speed device controller



      久久爱免费视频在线观