<code id="obzzi"><ol id="obzzi"></ol></code>
      <meter id="obzzi"></meter>
    1. <meter id="obzzi"><u id="obzzi"></u></meter>
    2. LPC2292


      型號 封裝 在線定購
      LPC2292FBD144(查看) LQFP144


      技術資料—— LPC2292 PDF技術資料

      LPC2292 概述

      The LPC2292 microcontroller is based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

      With its 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, 2 advanced CAN channels, PWM channels and up to nine external interrupt pins the LPC2292 is particularly suitable for automotive and industrial control applications as well as medical systems and fault-tolerant maintenance buses. The number of available GPIOs ranges from 76 (with external memory) through 112 (single-chip). With a wide range of additional serial communications interfaces, the LPC2292 is also suited for communication gateways and protocol converters as well as many other general-purpose applications.

      LPC2292 參數
      LPC2292 存儲器
      FLASH (kB) 256
      RAM (kB) 16
      LPC2292 性能參數
      fmax (MHz) 60
      I/Opins 112
      UART 2
      I²C 1
      I²S -
      SPI 2
      SSP -
      ADC 8
      DAC -
      定時器 3
      PWM 6
      I/O 電壓 (V) 3.3
      CPU 電壓 (V) 1.8
      LPC2292 封裝與引腳